开关磁阻电机结构性转矩脉动抑制方法

开关磁阻电机具有结构简单、成本低和调速范围广等优势,但其双凸极结构和控制器的开关特性,导致存在转矩脉动现象,使得抑制转矩脉动成为焦点问题。首先从开关磁阻电机的结构和运行机理出发,针对线性解析方法难以分析转矩特征的问题,建立电机有限元模型求解出转矩特征并进行样机验证试验。分析样机结构参数对转矩脉动的影响,针对结构参数耦合问题,选择NSGA-Ⅱ算法在参数优化平台上对样机结构参数进行多目标寻优,在保证优化后样机的转矩脉动系数和平均转矩均优于初始电机的条件下,最终获得样机最优化结果。结果表明,不同结构参数对电机转矩的影响有较大的差异,对结构参数的优化能有效地抑制转矩脉动,该参数优化方法可以为开关磁阻电机结构性转矩脉动抑制提供参考。     

薄壁弱刚性钛合金结构件制造工艺

随着新型材料冶金技术的发展与进步,钛合金作为“崛起的第三代金属”已完全替代了铝镁合金和钢构件,成为航天飞行器上应用范围最广的材料之一。从某新研制航天飞行器外部结构件用钛合金材料的特性及切削特点入手,针对薄壁弱刚性钛合金结构件在实际加工过程中遇到的诸多难点,提出了相应的解决办法,并重新设计了零件工装。结果表明,改进措施不仅保证了零件质量,而且提高了零件加工效率,使单件零件的生产周期缩短了近10h。     

Structural silicone sealants after exposure to laboratory test for durability assessment

During the service life of structural sealant glazing (SSG) facades, the load-bearing capacity of the silicone bonds needs to be guaranteed. Laboratory tests can assess the durability of SSG-systems based on mechanical characteristics of the bond after simultaneous exposure to both climatic and mechanical loads. This article studies how the material characteristics of two common structural sealants are affected by laboratory and field exposure. Dynamic mechanical analysis (DMA) confirms a reduction in the dynamic modulus of exposed silicone samples. Results from thermogravimetric analysis, Fourier-transform infrared spectroscopy, differential scanning calorimetry, and small-angle X-ray scattering/wide-angle X-ray scattering show differences between the two sealants and indicate no/minor changes in the composition and morphology of the laboratory and field exposed sealants. Mechanical characterization methods, such as DMA, and tensile and shear testing of the structural bond, are shown to be sensitive toward the combined climatic and mechanical loadings, and are hence suitable for studying degradation mechanisms of structural sealants.     

Application of ultrasound treatment for modulating the structural,functional and rheological properties of black bean protein isolates

The modulating effect of ultrasound treatments at varying powers and times on the structural and functional properties of black bean protein isolate (BBPI) was investigated. Compared with native BBPI, low-power (150 W) and medium-power (300 W) ultrasound treatments increased the solubility, foaming and emulsifying properties of BBPI, especially at 300 W, 24 min. This effect arises predominantly due to increased exposure of hydrophobic groups, which serve to increase the interactions between the protein and water molecules. Additionally, an increase in the protein surface activity improved the absorption of protein molecules at the oil–water and air–water interfaces. Rheology data showed that increased hydrophobic and hydrogen-bonding interactions improved the water-holding capacity of BBPI gels following ultrasound treatment. However, high-power (450 W) ultrasound treatment weakened the functional properties of BBPI, and this was likely due to the formation of macromolecular BBPI aggregates. Overall, this study indicates that ultrasound treatment could be a promising approach for modulating other plant protein resources as well as expanding the application of black bean protein.     

橡塑密封技术发展现状与趋势

阐述了近年来我国橡塑密封行业的发展情况及在各行业的应用,综述了橡塑密封结构设计、橡塑密封材料、检验检测和制造工艺的发展现状,分析了国内橡塑密封行业和技术与国外发达国家先进密封技术发展存在的差距和不足,提出了橡塑密封技术的发展方向,并就未来我国橡塑密封行业的发展提出了建议。     

Vibration suppression for monopile and spar‐buoy offshore wind turbines using the structure‐immittance approach

Offshore wind turbines have the potential to capture the high‐quality wind resource. However, the significant wind and wave excitations may result in excessive vibrations and decreased reliability. To reduce vibrations, passive structural control devices, such as the tuned mass damper (TMD), have been used. To further enhance the vibration suppression capability, inerter‐based absorbers (IBAs) have been studied using the structure‐based approach, that is, proposing specific stiffness‐damping‐inertance elements layouts for investigation. Such an approach has a critical limitation of being only able to cover specific IBA layouts, leaving numerous beneficial configurations not identified. This paper adopts the newly introduced structure‐immittance approach, which is able to cover all network layout possibilities with a predetermined number of elements. Linear monopile and spar‐buoy turbine models are first established for optimisation. Results show that the performance improvements can be up to 6.5% and 7.3% with four and six elements, respectively, compared with the TMD. Moreover, a complete set of beneficial IBA layouts with explicit element types and numbers have been obtained, which is essential for next‐step real‐life applications. In order to verify the effectiveness of the identified absorbers with OpenFAST, an approach has been established to integrate any IBA transfer functions. It has been shown that the performance benefits preserve under both the fatigue limit state (FLS) and the ultimate limit state (ULS). Furthermore, results show that the mass component of the optimum IBAs can be reduced by up to 25.1% (7,486 kg) to achieve the same performance as the TMD.     

豫西吉家洼金矿床主矿脉找矿前景分析

吉家洼金矿床位于豫西熊耳山上宫金矿集区的西部。通过对矿床地质、主要矿脉地质特征研究,对F1、F2和WF1矿脉进行了矿体趋势预测和找矿前景分析。分析结果表明,WF1矿脉北中部125～119线间、中部123～107线间及南部100～114线间,深部具有较大的找矿潜力;F1、F2矿脉11～8线为找矿有利地段,具有进一步找矿空间。     

Phase relation studies in the CeO2–La2O3–Er2O3 system at 1500°C

Materials based on CeO₂–La₂O₃–Er₂O₃ system are promising candidates for a wide of applications, but the phase relationship has not been studied systematically previously. To address this challenge, the isothermal section of the phase diagram for 1500 °C was investigated. The phase relations in the CeO₂–La₂O₃–Er₂O₃ ternary system at 1500 °C were studied by X-ray diffraction and scanning electron microscopy in the overall concentration range. To study phase relationships at 1500 °C the as-repared samples were thermally treated in two stages: at 1100 °C (for 300 in air) and then at 1500 °C (for 70 h in air) in the furnaces with heating elements based on Fecral (H23U5T) and Superkanthal (MoSi2), respectively. The solid solutions based on various polymorphous forms of constituent phases and with perovskite-type structure of LaErO₃ (R) with orthorhombic distortions were revealed in the system. No new phases were found. The isothermal section of the phase diagram for the CeO₂–La₂O₃–Er₂O₃ system has been constructed. It was established that in the ternary CeO₂–La₂O₃–Er₂O₃ system there exist fields of solid solutions based on hexagonal (A) modification of La₂O₃, cubic modification of CeO₂ with fluorite-type structure (F), cubic modification Er₂O₃ and with perovskite-type structure of LaErO₃ (R) with orthorhombic distortions. The maximal solubility of ceria in LaErO₃ was found to be around ∼ 2 mol% CeO₂ along the section CeO₂–(50 mol % La₂O₃ –50 mol% Er₂O₃).     

白藜芦醇丙烯酸酯的合成及抗氧化活性研究

以白藜芦醇为先导化合物,合成了白藜芦醇丙烯酸酯,以获得具有更好抗氧化活性的白藜芦醇衍生物。以白藜芦醇和丙烯酰氯为原料,酯化法得到白藜芦醇丙烯酸酯。以维生素C为阳性对照,研究白藜芦醇丙烯酸酯对2,2-联苯-1-苯基肼(DPPH)自由基的清除活性和抗氧化活性。用NMR和HRLC-MS对白藜芦醇丙烯酸酯进行了表征。目标产物白藜芦醇丙烯酸酯收率为30.2%。白藜芦醇丙烯酸酯的抗氧化活性高于白藜芦醇,但低于维生素C。合成得到了白藜芦醇丙烯酸酯,其反应路线简单易行,条件温和,产物抗氧化活性较先导化合物有所提高。